220 Volt Single Phase Dual Mitering Metal Cutting Band Saw. 1" Blade Width. Variable Speed Control (66- 280 FPM). Includes Blade Tension Device, Direct Drive Gear Box, Manual or Hydraulic Descent and Coolant System.
Over the years, the BS-260M dual mitering band saw has gone through a number of changes. Once again we have improved it, and made it even better. Gone is the day of the DC driver board, now the BS-260M has an AC inverter for precise speed control and better reliability. Even better, powered by 220 volt single phase, it can be used just about anywhere.
The gear driven BS-260M is a 9" band saw, making it the perfect saw for cutting at 90 degrees or miter angles. This saw has a dual angle head capable of cutting 0-60 degrees (R) and 0-45 (L), making it one of the most versatile saws on the market. Quick release head locks allow the operator to change the miter angle in seconds.
The BS-260M band saw is made from only the best materials for long production life. The saw bow and pivot is made from solid cast iron to ensure the straightest cuts with little to no vibration. A total of eight precision ball bearings are provided to keep the blade in alignment as well. The BS-260M also includes a blade, a powerful coolant system, and a blade tension safety switch that shuts the machine off in the event of a blade break.
Operation of the BS-260M is easy as well; there are two modes of operation depending on your preference. 1- Manual descent for small production runs. The operator simply turns on the machine via a trigger switch in the descent handle, and manually guides the band saw blade through the material. This mode is perfect for the small or medium sized fabrication needs. 2- Hydraulic descent for larger production runs. Hydraulic descent increases blade life and reduces operator fatigue. It utilizes a flow control for precise adjustment.