KURT D810 Manual Vise 8" with 10" opening USA MADE
Kurt’s D810 vise has a large 10" jaw opening and a clamping force up to 11,600 lbs.
The top down, four bolt design on the stationary jaw reduces vise deflection by 25% while allowing total disassembly of the vise without removing the body from the machine table.
Special brush seals shield and protect vise screw threads from machined chips and residue.
The nut has been shortened so as not to protrude past the end of the vise body. Powder coat paint resists coolant-induced peeling for greater corrosion protection.
The overall vise footprint is identical to earlier models so both can be used interchangeably and in tandem.
The D810 vise locks parts precisely including very large parts for aggressive “hogging out” operations.
•Patented AngLock® design does away with movement or tilt of the movable jaw while it is clamped.
•Permits clamping in 4 positions.
•Flame hardened vise bed.
•Hardened and ground jaw plates.
•Needle bearing increases jaw clamping pressure.
Jaw Width (Inch) 8
Jaw Opening Capacity (Inch) 10
Throat Depth (Decimal Inch) 1.9650
Jaw Height (Decimal Inch) 2.2000
Base Length (Decimal Inch) 21.8100
Load Capacity (Lb.) 11596.00
Base Height (Decimal Inch) 3.3100
Maximum Clamping Force (psi) 80000.00
Overall Height (Decimal Inch) 5.5100
Weight 158 Lbs - SHIPS TRUCK